Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light in the Lexus GX 460?

Model: Lexus GX J150 - Years 2010-2023
Part:

In this tutorial, we can see how to reset the tire pressure light in the Lexus GX 460, an extremely simple and quick operation, to be done only once the correct pressure of each tire has been restored following the instructions in the manual. First of all, let's go inside the car, then insert the key and turn on the dashboard. Next, locate the "SET" button located in the lower area of the dashboard, on the driver's side, and hold it down for the necessary time for the light to disappear from the dashboard. To complete the procedure, simply restart the vehicle.

Posted on 29 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on the Lexus GX 460?
How to reset the tire pressure light on the Lexus GX 460?
Lexus GX (2010-2023 / J150) .. In this tutorial, we can see how to reset the tire pressure light in the Lexus GX 460, an extremely simple and quick operation, to.. …
How to Reset the Tire Light on a Lexus GX 460?
How to Reset the Tire Light on a Lexus GX 460?
Lexus GX (2010-2023 / J150) In this tutorial, you will learn how to reset the tire light on a Lexus GX 460. This operation is extremely simple and quick, and should be done only…
How to reset the tire pressure light in the Lexus GX 460?
How to reset the tire pressure light in the Lexus GX 460?
Lexus GX (2010-2023 / J150) .. In this tutorial we can see how to reset the tire pressure light in the Lexus GX 460, an extremely simple and quick operation. Before.. …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos