Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light on the Lexus GX 460?

Model: Lexus GX J150 - Years 2010-2023
Part: Warning light – error code

In this tutorial, we can see how to reset the tire pressure light in the Lexus GX 460, an extremely simple and quick operation, to be done only once the correct pressure of each tire has been restored following the instructions in the manual. First of all, let's go inside the car, then turn on the instrument panel and, with the directional buttons on the steering wheel, reach the settings menu. Then enter "Vehicle settings", "TPWS", move the selector to "Set Pressure" and reset by holding down the "OK" button.

Posted on 2 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light in the Lexus GX 460?
How to reset the tire pressure light in the Lexus GX 460?
Lexus GX (2010-2023 / J150) In this tutorial we can see how to reset the tire pressure light in the Lexus GX 460, an extremely simple and quick operation. Before proceeding, we …
How to reset the tire pressure light in the Lexus GX 460?
How to reset the tire pressure light in the Lexus GX 460?
Lexus GX (2010-2023 / J150) In this tutorial, we can see how to reset the tire pressure light in the Lexus GX 460, an extremely simple and quick operation, to be done only once …
What is the Fuse Box Diagram for the Lexus GX 460?
What is the Fuse Box Diagram for the Lexus GX 460?
Lexus GX (2010-2023 / J150) In this video, you can see where the fuse boxes are located in the Lexus GX 460 and the corresponding diagrams to consult if you need to check the fu…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos