Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front bumper of the Lexus RX.

Model: Lexus RX Al10, MK 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Front bumper

See other generations:
Video tutorial

In this guide, we will explore the procedure for disassembling and replacing the front bumper of the Lexus RX. First, let's open the car's hood and begin by removing all the clips from the upper plastic shield to take it off. Next, we unscrew the screws located underneath the bumper and on both sides of the front wheel wells, as shown in the video.

At this point, gently detach the bumper from the sides until it is completely removed, replacing it with a new one if necessary.

Secure it properly and finally reassemble the plastic shield of the engine compartment.


Posted on 5 December 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Lexus RX remote control
How to replace the battery of the Lexus RX remote control
Lexus RX (2016-2022 / MK 4, Al20) When the Lexus RX remote control stops working, it is necessary to replace the battery; the model of battery to purchase is CR 2032. To begin the rep…
Where is the fuse box located in the Lexus Rx 2007
Where is the fuse box located in the Lexus Rx 2007
Lexus RX (2003-2008 / MK 2, Xu30) In this new guide, discover where the box containing all the fuses for your Lexus Rx second series (2007) is located. This way, you can intervene saf…
How to Replace the Cabin Filter in the Lexus RX?
Lexus RX (2016-2022 / MK 4, Al20) In this tutorial, you will see how to replace the cabin filter in the Lexus RX, a very simple and quick operation. First, sit in the passenger seat, …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos