Do it yourself
| ||||
|
Deactivate seat belt buzzer
Model: Lexus RX
Al10, MK 3
- Years 2008-2015 If you start driving without fastening your seat belts, in addition to flashing the relative warning light on the instrument panel, the panel itself emits an audible signal through a buzzer that does not stop until you fasten the seat belt (on some models the signal acoustic ends about a minute); It is possible to deactivate the acoustic signal but not the luminous one clearly through a manual procedure to be activated using the ODO reset button for partial kilometers. -1 Turn on the ignition without starting the engine; -2 Press the ODO button to display the partial kilometers on the instrument panel; -3 Turn the ignition off and on again; -4 Press and hold the ODO button and fasten the passenger side seat belt; -5 Confirm to deactivate the acoustic signal using the ODO button; -6 Turn the ignition off and on again; -7 Start driving without fastening the seat belt to check that the buzzer does not activate;
Posted on 21 August 2023 by ScegliAuto
This video is currently unavailable
Auxiliary belt replacement
Lexus RX (2008-2015 / Al10, MK 3) To replace the auxiliary belt, lift the car on suitable car stands and remove the right front wheel (passenger side): it is advisable to loosen the w
Car radio disassembly instructions
Lexus RX (2008-2015 / Al10, MK 3) To be able to disassemble the original car radio it is necessary to remove some elements of the central tunnel. First move the gear lever backwards t
How to replace the cabin filter in the Lexus RX?
Lexus RX (2016-2022 / Al20, MK 4) In this tutorial we can see how to replace the cabin filter in the Lexus RX, an extremely simple and fast operation. First of all let's position ours Other guides that may interest you
|
How to deactivate the safe lock on a Volkswagen Golf.The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.092
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |