Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Lincoln MKS key remote control

Model: Lincoln Mks MK 1 - Years 2009-2016
Part: Key

Let's see the information that will allow us to disassemble and replace the battery of the key fob for the Lincoln MKS. First, take the key fob in hand and start by removing the physical key from inside it; leverage the slot created to open the key fob in two parts, thus accessing the electronic board and the battery, as shown in the video. At this point, remove the battery and replace it with a new one, of the correct type and with the same code; insert the battery in the correct direction and assemble the key fob respecting the order of the components.

Posted on 7 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Lincoln MKS remote control?
How to replace the battery of the Lincoln MKS remote control?
Lincoln Mks (2009-2016 / MK 1) Replacing the remote control battery of the Lincoln MKS, as we can see in this tutorial, is a very simple and fast operation. To do this, we will nee…
How to replace the Lincoln MKS remote control battery?
How to replace the Lincoln MKS remote control battery?
Lincoln Mks (2009-2016 / MK 1) As we can see in this tutorial, changing the remote control battery of your Lincoln MKS is a very simple and fast operation. To do this, we will need…
Changing the battery in the Lincoln Mks remote control
Changing the battery in the Lincoln Mks remote control
Lincoln Mks (2009-2016 / MK 1) To change the remote control battery in your Lincoln Mks you will need a CR2032 coin cell battery. We will open the remote control from the rear butt…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos