Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Lincoln MKZ

Model: Lincoln Mkz MK 2 - Years 2013-2020
Part: Air filter

To replace the air filter in the vehicle, follow these steps: access the cabin and pull the hood release lever, open the hood, and locate the cover of the compartment that contains the air filter. Using a ratchet wrench, remove the four screws at the corners of the cover and lift it off. Then, pull out the old filter and replace it with a new one (check the type of filter that is suitable for your vehicle, see the owner's manual). At this point, reposition the filter cover and tighten the four screws again.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Lincoln MKZ?
How to Replace the Air Filter on a Lincoln MKZ?
Lincoln Mkz (2013-2020 / MK 2) To replace the air filter on a Lincoln MKZ, open the hood to access the components inside the engine compartment. The box containing the filter is lo…
Replacement of the cabin air filter of the Lincoln MKZ
Replacement of the cabin air filter of the Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) In a few simple steps, we will see how to disassemble and replace the cabin air filter of the Lincoln MKZ. First, open the front passenger door and b…
Replace the Cabin Air Filter in the Lincoln MKZ
Replace the Cabin Air Filter in the Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) Follow the instructions below to remove and replace the cabin air filter in the Lincoln MKZ. First, open the front door on the passenger side and sta…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos