Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Lincoln Mkz

Model: Lincoln Mkz MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Air filter

See other generations:
Video tutorial

To independently replace the air filter in your vehicle, refer to the instructions in this guide and the video. First, open the hood and grab a screwdriver to unscrew the screws securing the cover of the filter box located just above the engine.

Once the cover is removed, you will have access to the filter housing. You can proceed to remove and clean the filter or, if necessary, replace it with an equivalent model with the same specifications.

Then, place the filter back in and close the cover with the four screws.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

Replacement of the cabin air filter of the Lincoln MKZ
Replacement of the cabin air filter of the Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) In a few simple steps, we will see how to disassemble and replace the cabin air filter of the Lincoln MKZ. First, open the front passenger door and b…
How to Change the Cabin Air Filter of the Lincoln MKZ
How to Change the Cabin Air Filter of the Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) The information below will guide you on how to remove and replace the cabin air filter of the Lincoln MKZ. First, get inside the vehicle on the front…
How to Replace the Cabin Air Filter in a Lincoln MKZ
How to Replace the Cabin Air Filter in a Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) Today, you will learn how to replace the cabin air filter in a Lincoln MKZ. First, get inside the cabin and open the glove compartment. Once removed,…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos