Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in the Lincoln MKX?

Model: Lincoln Mkx MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Car stereo

See other generations:
Video tutorial

To replace the radio in the Lincoln MKX, use a tool to pry off the plastic cover that surrounds the gear shift. Once this is removed, loosen the screws that secure the glove compartment located under the climate control panel.

After removing this, detach the cover that surrounds the climate controls and the radio itself. At this point, you can loosen the screws that secure the radio, pull it out of its housing, and disconnect the connectors at the back.

After removal, you can insert the new replacement part.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in a Lincoln MKX?
How to Replace the Radio in a Lincoln MKX?
Lincoln Mkx (2007-2015 / MK 1) To replace the radio in a Lincoln MKX, use a tool to pry off the plastic panels located beneath the radio and around the display, also loosening the …
How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in a Lincoln MKX, open the hood to access the components in the engine compartment. On the right side, you will find the batte…
How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in the Lincoln MKX, open the hood to access the components inside the engine compartment. The battery is located immediately u…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos