Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on a 2015 Lincoln MKZ?

Model: Lincoln Mkz MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Service warning light

See other generations:
Video tutorial

The first step to reset the oil life light is to insert the key and press the appropriate button to enter "accessory" mode. During this phase, do not touch the brake pedal, or you will not be able to access the mode that allows you to reset the light.

Once done, press the OK button located on the left side of the steering wheel, then press the down arrow below the OK button until you reach the "settings" option, which you can select by pressing OK. Press this button again to select the "vehicle" option, then scroll down to "oil life." Now, just hold the OK button until the reset is complete.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Lincoln MKZ
How to Reset the Oil Light on the Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) In this new guide for all Lincoln MKZ (MK2) owners, you will learn how to reset the engine oil light independently and without using diagnostic tools…
How to Reset the Oil Light on a 2013 Lincoln MKZ
How to Reset the Oil Light on a 2013 Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) The procedure to manually reset the engine oil change light on a 2013 Lincoln MKZ is very simple and takes just a few seconds to complete without dif…
How to Reset the Oil Light on a 2015 Lincoln MKZ
How to Reset the Oil Light on a 2015 Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) If the engine oil light on the instrument panel of your 2015 Lincoln MKZ stays on even after you have changed the oil and filter, you need to manuall…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos