Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel of the Lincoln Navigator?

Model: Lincoln Navigator U228 - Years 2003-2006
Part: Door trim panel

To remove the door panel of the Lincoln Navigator, you need to detach the plastic panel that surrounds the inner handle; after this has been removed, you can unscrew all the additional screws present on the panel. These are located under the armrest, at the bottom of the panel, and on the side of the door: when all these screws have been loosened, you can pry to completely detach the panel, disconnecting the underlying connectors. After removal, you can insert the new panel, securing it properly.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Lincoln Navigator (2018-2025 / U554) The cabin fuse box in your new Lincoln Navigator is well hidden for safety reasons, making it difficult to locate on your own. Carefully read the fol…
Lincoln Navigator (2003-2006 / U228) This video shows how to replace a relay in a Lincoln Navigator. Generally, relays are located inside the fuse box, so to follow the example in the vi…
Lincoln Navigator (1998-2002 / Un173) If your 2000 Lincoln Navigator's engine frequently overheats, it is time to replace the air filter. This operation can be done independently even wit…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos