Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on the Lincoln MKZ

Model: Lincoln Mkz MK 1 - Years 2006-2012
Part: V-belt

To replace the serpentine belt on the Lincoln MKZ, you need to unscrew the bolts that secure the right front wheel so that it can be removed after lifting the car with a jack. Once the wheel is removed, you can access the components at the back, where the serpentine belt is located. This can be removed from its housing after loosening the nuts that secure the center pins of the pulleys; after removal, you can install the new one and mount the corresponding wheel, securing it with the bolts.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Lincoln MKZ?
How to Replace the Air Filter on a Lincoln MKZ?
Lincoln Mkz (2013-2020 / MK 2) To replace the air filter on a Lincoln MKZ, open the hood to access the components inside the engine compartment. The box containing the filter is lo…
How to Reset the Oil Light on the Lincoln MKZ
How to Reset the Oil Light on the Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) In this new guide for all Lincoln MKZ (MK2) owners, you will learn how to reset the engine oil light independently and without using diagnostic tools…
How to Replace the Key Fob Battery for the Lincoln MKZ?
How to Replace the Key Fob Battery for the Lincoln MKZ?
Lincoln Mkz (2013-2020 / MK 2) To replace the key fob battery for the Lincoln MKZ, press the button located on the bottom of the device to extract the key inside the fob. After rem…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos