Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lincoln
    3. :
  3. Navigator
    4. : How do you replace a relay in the Lincoln Navigator?

Lincoln Navigator - Video tutorial

Model: Lincoln Navigator U228 - Years 2003-2006
Part: Fuse box
Operation: How do you replace a relay in the Lincoln Navigator?

With this video, we can see how to replace a relay in the Lincoln Navigator. Generally, relays are found inside the fuse box, so to follow the example in the video, we need to open the one located inside the cabin. First, we remove the protective panel next to the passenger's feet, and then also the cover of the fuse box. Now, we are facing both the fuses and the relays, and we can check which ones are no longer functioning. Once identified, we simply pull them outwards and replace them with new ones with the same characteristics.


Posted on 2 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos