Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xylo
    4. : How to replace the Mahindra Xylo diesel filter

Mahindra Xylo - Video tutorial

Model: Mahindra Xylo MK 1 - Years 2009-2019
Part: Diesel filter
Operation: How to replace the Mahindra Xylo diesel filter

Let's see in this guide how to disassemble and replace the Mahindra Xylo diesel filter, following the instructions below. First of all, we open the bonnet of our car and begin to identify the diesel filter, which we find at the bottom left of the engine compartment; then unscrew the fixing screws and disconnect the electrical connector and the fuel inlet and outlet pipes, as shown in the video. At this point we are going to install the new filter cartridge, making the various connections and fixing everything with its screws, following the video to the end!


Posted on 17 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos