Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio Panel on the Mahindra Marazzo

Model: Mahindra Marazzo MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Car stereo

Video tutorial

If you need to remove the front panel to install a radio in this vehicle, follow the instructions in this video and the description below. First, remove the screws located above the instrument cluster, then take off the plastic panel that frames it. Next, pry to extract the front panel of the dashboard, and underneath, you will find the screws securing the radio housing.

Unscrew these to remove the bracket. This will allow you to proceed with installing the radio.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Mahindra Marazzo
How to Replace the Battery on a Mahindra Marazzo
Mahindra Marazzo (2018-2025 / MK 1) To replace the battery on a Mahindra Marazzo, open the hood to access the device located in the center area just below the windshield. Once the devic…
How to Reset the Service Light on the Mahindra Marazzo
How to Reset the Service Light on the Mahindra Marazzo
Mahindra Marazzo (2018-2025 / MK 1) Resetting the service light on your Mahindra Marazzo is very simple. With the instructions in this guide, you will complete it in seconds without any…
How to Reset the Service Light on the Mahindra Marazzo
How to Reset the Service Light on the Mahindra Marazzo
Mahindra Marazzo (2018-2025 / MK 1) To manually reset the service light that appears on the dashboard of your Mahindra Marazzo, follow this simple procedure. First, completely turn off …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos