Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Trip Odometer of the Mahindra Thar

Model: Mahindra Thar MK 2 - Years 2020-2026
Part: Warning light – error code

To reset the trip odometer (Trip A) on your Mahindra Thar Mk2, follow this manual reset procedure. First, insert the key, turn it to the first position, and start the ignition. Move to the button panel located near the radio and navigate through the menu until you see "Trip A" on the mini display. At this point, locate the button with the "enter" symbol and hold it down for a few seconds. Once you see that "Trip A" has returned to zero, release the button, and you're done.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Mahindra Thar?
How to Reset the Service Light on the Mahindra Thar?
Mahindra Thar (2020-2026 / MK 2) In this tutorial, you will see how to reset the service light on the Mahindra Thar, a very simple operation. Before proceeding, make sure you have co…
How to Replace the Headlights on Mahindra Thar
How to Replace the Headlights on Mahindra Thar
Mahindra Thar (2020-2026 / MK 2) This guide shows how to remove and replace the headlights on the Mahindra Thar by following these simple steps. First, open the hood and start removi…
How to Reset the Service Light on a Mahindra Thar?
How to Reset the Service Light on a Mahindra Thar?
Mahindra Thar (2020-2026 / MK 2) To reset the Service light on a Mahindra Thar, press and hold the menu button located on the lower left side of the dashboard near the steering colum…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos