Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where Are the Fuses Located on the Mahindra Tuv300?

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: Fuse box

The vehicle described here is equipped with three fuse boxes. The first fuse box is located in the engine compartment above the battery. The second fuse box is near the rear of the left front headlight, while the third box is inside the cabin just below the steering wheel on the door side at the bottom of the dashboard and is protected by a plastic cover that needs to be opened. Each fuse is marked with a number, so with the diagram available, you can identify each fuse and its corresponding circuit.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located on the Mahindra TUV300?
Where are the fuses located on the Mahindra TUV300?
Mahindra Tuv300 (2015-2020 / MK 1) The fuses on the Mahindra TUV300 are located inside the only fuse box installed on the vehicle: in this car model, you can find it in the engine comp…
How to Reset the Service Light in a Mahindra Tuv300?
How to Reset the Service Light in a Mahindra Tuv300?
Mahindra Tuv300 (2015-2020 / MK 1) The video here shows how to reset the service light, the one shaped like a wrench that appears on the display, in a Mahindra Tuv300, but the same pro…
How to Replace the Glass of the Outside Rearview Mirror on a Mahindra Tuv300
How to Replace the Glass of the Outside Rearview Mirror on a Mahindra Tuv300
Mahindra Tuv300 (2015-2020 / MK 1) In this short and simple guide, you will see the steps to remove and replace the glass of the outside rearview mirror on a Mahindra Tuv300. First, mo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos