Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and Cleaning of the Mixer on a Malaguti Fifty Top

Model: Malaguti Fifty Top
Part:

Video tutorial

First, position the scooter in a stable and secure manner so you can work safely. After removing the engine cover, start by disconnecting the two tubes (fuel and oil) from the mixer itself.

Next, unscrew the screws that secure the mixer in its housing (as shown in the video images). At this point, you can disassemble the mixer in all its parts and clean it thoroughly with suitable tools (as seen in the images).

Once finished, reassemble the mixer and reposition it in its housing, and you're done!


Updated on 8 March 2026 by ScegliAuto


Related tutorials

Disassembly and Cleaning of Malaguti Fifty Top Mixer
Disassembly and Cleaning of Malaguti Fifty Top Mixer
Fifty Top To disassemble and clean the mixer on the Malaguti Fifty Top, first secure the motorcycle in a safe, immobilised position. This precaution is necessa…
How to Remove the Engine Block of the Malaguti Fifty Top
How to Remove the Engine Block of the Malaguti Fifty Top
Fifty Top Below are the steps to remove the entire engine block from the frame of the Malaguti Fifty Top, following the instructions provided. First, place the…
How do you replace the fork on the Malaguti Fifty Top?
How do you replace the fork on the Malaguti Fifty Top?
Fifty Top To replace the fork on the Malaguti Fifty Top, you need to loosen the screws that secure the front wheel to its housing. It will also be necessary to…

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos