Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Alto 800
    4. : How to replace the headlight bulb on the Maruti Alto 800?

Maruti Alto 800 - Video tutorial

Model: Maruti Alto 800 AOD - Years 2012-2023
Part: Light bulb
Operation: How to replace the headlight bulb on the Maruti Alto 800?

In order to replace the headlight bulb of the Maruti Alto 800 you have to open the hood, so that you can access the internal part of the headlight corresponding to the bulb to be replaced. Here will be the connector at the rear of the headlight, which will need to be disconnected so that the bulb inside can be extracted from its housing. When this has been removed, it will be possible to insert the new one, connecting it to the lighthouse and inserting it inside its housing in the lighthouse. After installation, you will need to verify that it works correctly.


Posted on 24 April 2024 by ScegliAuto



How to replace the rear light bulbs in the Maruti Alto 800?
Maruti Alto 800 (2012-2023 / AOD) In this tutorial we can see how to replace the rear light bulbs in the Maruti Alto 800, a very simple operation. First of all we open the tailgate, t
How to synchronize the engine of the Suzuki Alto 800 - Maruti Alto 800.
Maruti Alto 800 (2012-2023 / AOD) Today's guide will show us the main steps necessary to time the engine of the Suzuki Alto 800 and Maruti Alto 800. First, we open the vehicle's engin
How to change the schedule of the Maruti Alto 800?
Maruti Alto 800 (2012-2023 / AOD) If you see the wrong time on the display of your Maruti Alto 800 dashboard and are wondering how to manually change it, then all you have to do is fo

Other guides that may interest you

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos