Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shock Absorber on a Maruti Alto 800?

Model: Maruti Alto 800 AOD - Years 2012-2023
Part: Shocks

To replace the front shock absorber on a Maruti Alto 800, lift the car with a jack so that the corresponding wheel is not in contact with the ground. This will allow you to unscrew the bolts that secure the wheel, removing it to access the components behind it. Here, you will find the screws that secure the shock absorber to its hub and the upper part of the body. By unscrewing these screws, you can remove the old shock absorber from its housing, insert the new one, and reinstall the corresponding wheel.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) Today's guide will show you the main steps to time the engine of the Suzuki Alto 800 and Maruti Alto 800. First, open the hood of the vehicle and rem…
Where is the fuse box of Maruti Alto 800 located?
Where is the fuse box of Maruti Alto 800 located?
Maruti Alto 800 (2012-2023 / AOD) If you are curious to find out where the fuse box of your Maruti Alto 800 is located, then all you have to do is carefully read the following guide a…
How to Replace the Fuel Filter in a Maruti Alto 800?
How to Replace the Fuel Filter in a Maruti Alto 800?
Maruti Alto 800 (2012-2023 / AOD) Replacing the fuel filter in a Maruti Alto 800 is a very simple and quick operation. First, lift the left rear area of the car with a jack, then loca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos