Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulbs in a Maruti Alto 800?

Model: Maruti Alto 800 AOD - Years 2012-2023
Part: Light bulb

One or more brake light bulbs have burned out and need replacement? You can do it yourself, spending only on the purchase of the bulb you need to change, without going to a shop. Make sure to buy the correct type of bulb for your car by consulting the owner's manual, which contains all the necessary specifications. Now, open the trunk and remove the screws from the light assembly, detach it, and then pull out the socket you need. Remove the burned-out bulb and replace it with the new one, avoiding direct contact with your fingers, and then reassemble everything.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) Today's guide will show you the main steps to time the engine of the Suzuki Alto 800 and Maruti Alto 800. First, open the hood of the vehicle and rem…
How to Replace the Outside Rearview Mirror on a Maruti Alto 800?
How to Replace the Outside Rearview Mirror on a Maruti Alto 800?
Maruti Alto 800 (2012-2023 / AOD) To replace the rearview mirror on a Maruti Alto 800, detach the triangular plastic cover located on the inside of the door, corresponding to the mirr…
How to Replace the Control Arm on a Maruti Alto 800
How to Replace the Control Arm on a Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) In this short and simple guide, you will find the main instructions for removing and replacing the control arm on a Maruti Alto 800. First, lift the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos