Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. S Cross
    4. : Replacement of the rear brake pads of the Maruti S Cross

Maruti S Cross - Video tutorial

Model: Maruti S Cross MK 2 - Years 2015-2022
Part: Brake pads
Operation: Replacement of the rear brake pads of the Maruti S Cross

In this video tutorial we will see how to remove and replace the rear brake pads of the Maruti S Cross, following these simple steps. First of all, we lift the car and start removing the rear wheel; after which we unscrew the fixing screws of the brake caliper, which we find on the back, using a star or socket wrench. At this point we remove the caliper from the support in order to later remove the old brake pads; we lever on the caliper piston to make it retract, giving a clean up of dirt. Finally we install the new pads and reassemble everything!


Posted on 12 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos