Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Maruti Ritz

Model: Maruti Ritz MK 1 - Years 2009-2015
Part: Air filter

A simple DIY task to perform on the vehicle is to replace the engine air filter. To do this, follow the simple instructions below and refer to the video as well. Open the hood and locate the box containing the filter, which is next to the battery. Loosen the hose clamp of the air duct and disconnect the pressure sensor connector. Then, unscrew the screws around the filter housing and remove them. Lift the cover to access the compartment containing the filter. Remove the old filter and replace it with the new one, which should obviously have the same specifications as the one you are removing. Reposition the cover of the compartment, re-screw the mounting screws, reconnect the pressure sensor connector, and tighten the air duct clamp.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Maruti Ritz?
How to Replace the Cabin Air Filter in a Maruti Ritz?
Maruti Ritz (2009-2015 / MK 1) As shown in this tutorial, replacing the cabin air filter in a Maruti Ritz is a very simple and quick task. First, sit in the passenger seat, then op…
How to Replace the Air Filter on a Maruti Ritz
How to Replace the Air Filter on a Maruti Ritz
Maruti Ritz (2009-2015 / MK 1) If you want to prepare to replace the engine air filter on this vehicle model, the video and description below provide tips and procedures for correc…
How to Replace the Shift Knob on a Maruti Ritz
How to Replace the Shift Knob on a Maruti Ritz
Maruti Ritz (2009-2015 / MK 1) In this short and simple guide, you will learn how to remove and replace the shift knob on a Maruti Ritz by following the instructions below. First, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos