Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heater Core in a Maruti Wagon R?

Model: Maruti Wagon R Stingray MK 3 - Years 2019-2026
Part: Heater core

To replace the heater core in a Maruti Wagon R Stingray, completely remove the dashboard to access the panels. You will need to disassemble all parts of the center panel, then remove the glove compartment from the passenger side, the plastics surrounding the steering column, etc. This will allow access to the components inside the dashboard: here you will find the heater core that must be freed from its housing by disconnecting it from the hoses and connectors. This way, you can install the new replacement part by reassembling all previously removed components.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a Maruti Wagon R Stingray?
How to Replace the Cabin Air Filter on a Maruti Wagon R Stingray?
Maruti Wagon R Stingray (2019-2026 / MK 3) To replace the cabin air filter on a Maruti Wagon R Stingray, open the glove compartment located on the passenger side to release the internal clips …
How to Replace the Remote Battery in a Maruti Wagon R?
How to Replace the Remote Battery in a Maruti Wagon R?
Maruti Wagon R Stingray (2019-2026 / MK 3) In this tutorial, we will see how to replace the remote battery in a Maruti Wagon R, a very simple and quick operation. For this, you will need a sma…
How to Replace the Air Filter on a Maruti Wagon R Stingray?
How to Replace the Air Filter on a Maruti Wagon R Stingray?
Maruti Wagon R Stingray (2010-2017 / MK 2) To replace the air filter on a Maruti Wagon R Stingray, open the hood to access the components inside the engine compartment. In the center of the co…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos