Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shock Absorber on a Maruti Kizashi?

Model: Maruti Kizashi MK 1 - Years 2009-2016
Part: Shocks

To replace the front shock absorber on a Maruti Kizashi, lift the car so you can loosen the bolts securing the corresponding front wheel. Once the wheel is removed, access the screws that secure the shock absorber to its housing: the first is located at the bottom, near the axle. The second can be found by opening the hood and accessing the underlying components. Once both screws are loosened, you can slide out the old shock absorber and remove it completely.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight on a Maruti Kizashi - Suzuki Kizashi
Maruti Kizashi (2009-2016 / MK 1) This guide outlines the steps necessary to remove and replace the front headlight on a Maruti Kizashi, as well as a Suzuki Kizashi. First, open the h…
How to Replace the Cabin Filter on a Maruti Kizashi?
How to Replace the Cabin Filter on a Maruti Kizashi?
Maruti Kizashi (2009-2016 / MK 1) Replacing the cabin filter on a Maruti Kizashi, as shown in this tutorial, is an extremely simple and quick operation. First, go to the passenger sea…
How to Replace the Timing Chain on a Maruti Kizashi?
How to Replace the Timing Chain on a Maruti Kizashi?
Maruti Kizashi (2009-2016 / MK 1) To replace the timing chain on a Maruti Kizashi, loosen the bolts securing the right front wheel so that it can be removed along with the inner fende…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos