Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Maruti Kizashi?

Model: Maruti Kizashi MK 1 - Years 2009-2016
Part: Cabin air filter

Replacing the cabin filter on a Maruti Kizashi, as shown in this tutorial, is an extremely simple and quick operation. First, go to the passenger seat, then open the glove compartment and disconnect the damper located on the left side. Once done, unclip the drawer from the dashboard by pressing both sides inward and remove the small upper shelf. Finally, locate the long rectangular door, open it, and proceed with replacing the filter, ensuring that the replacement is positioned correctly.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a Maruti Kizashi
How to Replace the Cabin Air Filter on a Maruti Kizashi
Maruti Kizashi (2009-2016 / MK 1) To replace the cabin air filter on this vehicle model, the description below provides all the useful indications and necessary information for the re…
How to Replace the Front Headlight on a Maruti Kizashi - Suzuki Kizashi
Maruti Kizashi (2009-2016 / MK 1) This guide outlines the steps necessary to remove and replace the front headlight on a Maruti Kizashi, as well as a Suzuki Kizashi. First, open the h…
How to Replace the Cabin Air Filter on the Maruti Kizashi
How to Replace the Cabin Air Filter on the Maruti Kizashi
Maruti Kizashi (2009-2016 / MK 1) If you notice that the airflow from the air conditioner has decreased, it may be necessary to replace the cabin air filter. The following description…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos