Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads of the Maruti Ritz

Model: Maruti Ritz MK 1 - Years 2009-2015
Part: Brake pads

In this brief and simple guide, learn how to remove and replace the front brake pads of the Maruti Ritz. First, lift the vehicle and remove the front wheel; then, unscrew the bolts securing the brake caliper to remove it from the rotor, as shown in the video. At this point, remove and replace the old brake pads with new, high-quality ones, cleaning the caliper of dirt first; then, press the piston back in to install the new pads, following the video tutorial to the end!

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads of the Maruti Ritz?
How to Replace the Front Brake Pads of the Maruti Ritz?
Maruti Ritz (2009-2015 / MK 1) To replace the front brake pads of the Maruti Ritz, lift the vehicle so that it is not in contact with the ground. Once the wheel is lifted, loosen t…
Replace the Shift Knob on the Maruti Ritz
Replace the Shift Knob on the Maruti Ritz
Maruti Ritz (2009-2015 / MK 1) This guide provides step-by-step instructions for removing and replacing the shift knob on the Maruti Ritz. First, get inside the vehicle and start b…
How to Replace Wiper Blades on a Maruti Ritz
How to Replace Wiper Blades on a Maruti Ritz
Maruti Ritz (2009-2015 / MK 1) To replace the wiper blades on your Maruti Ritz, our YouTuber purchased the parts from a Chinese e-commerce site for 379 rupees (just over $4) and sh…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos