Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Spoiler on a Maruti S-Cross

Model: Maruti S Cross MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

Video tutorial

As seen in the video, to install a spoiler on a Maruti S-Cross to give it a more aerodynamic look, first, you need to obtain the spoiler in the correct color and size. Check to see if it matches.

Next, using a drill, make two holes in the bodywork while opening the trunk. From the inside, near the electrical wires, drill the holes.

Place the spoiler back on the car and align it so you can open the trunk again, this time to screw in two screws with a Phillips screwdriver. Secure the screws with the two caps designed for this purpose.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Fog Light Bulb on the Maruti S-Cross
How to Replace the Front Fog Light Bulb on the Maruti S-Cross
Maruti S Cross (2015-2022 / MK 2) .. replace the front fog light bulb on the Maruti S-Cross, as well as the Suzuki S-Cross. First, move to the front and start removing the plastic clips found.. …
How to Change Spark Plugs on Maruti/Suzuki S-Cross
How to Change Spark Plugs on Maruti/Suzuki S-Cross
Maruti S Cross (2015-2022 / MK 2) .. change the spark plugs on a Maruti (or Suzuki) S-Cross with 67,000 miles: Start by removing spark plug number 1 with a ratchet wrench equipped with an.. …
Replacing the Rear Brake Pads on Maruti S Cross
Replacing the Rear Brake Pads on Maruti S Cross
Maruti S Cross (2015-2022 / MK 2) .. and replace the rear brake pads on the Maruti S Cross by following these simple steps. First, lift the vehicle and start removing the rear wheel; then.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos