Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outside Rearview Mirror on a Maruti S-Cross?

Model: Maruti S Cross MK 2 - Years 2015-2022
Part: Side mirror

To replace the rearview mirror on a Maruti S-Cross, you need to completely remove the door panel by unscrewing the screw located near the window switch and at the bottom of the panel. This will allow you to detach the door panel and access the mounting screws for the mirror: by unscrewing these screws and disconnecting the connector, you can remove the mirror from the outside of the door and install a new one. The new mirror can then be securely fastened and connected, and the corresponding panel reinstalled.

Updated on 15 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Remote Battery in the Maruti S-Cross?
How to Replace the Remote Battery in the Maruti S-Cross?
Maruti S Cross (2015-2022 / MK 2) .. to replace the remote battery in the Maruti S-Cross. For this simple and quick operation, you will need a replacement CR2032 battery and a small flathead.. …
How to Replace the Remote Battery of the Maruti S-Cross?
How to Replace the Remote Battery of the Maruti S-Cross?
Maruti S Cross (2015-2022 / MK 2) .. to replace the remote battery of the Maruti S-Cross. For this simple operation, you will only need a small flat-head screwdriver and a replacement.. …
How to Replace the Air Filter in the Maruti S-Cross
How to Replace the Air Filter in the Maruti S-Cross
Maruti S Cross (2015-2022 / MK 2) .. how to replace the air filter in the Maruti S-Cross. First, open the hood using the lever located inside the cabin. Now locate the intake manifold.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos