Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Windshield Wiper Blades on a Maruti Alto 800

Model: Maruti Alto 800 AOD - Years 2012-2023
Part: Windshield wipers

If you notice that the windshield wiper blades on your vehicle are no longer effective at cleaning your windshield, you can proceed to replace the blade by following the instructions in this description. First, lift the wiper arm, then rotate the blade and position it at a 90° angle to the arm, press the release tab, and remove the blade. Next, take the new blade, insert it into the housing, and secure the latch. Repeat the same steps to replace the other blade, and the job is done.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Location of the Fuse Boxes on the Maruti Alto 800
Location of the Fuse Boxes on the Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) The Maruti Alto 800 has two fuse boxes: the first is located under the dashboard on the driver's side. Among the most common fuses here, you can find…
How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) Today's guide will show you the main steps to time the engine of the Suzuki Alto 800 and Maruti Alto 800. First, open the hood of the vehicle and rem…
How to Replace the Control Arm on a Maruti Alto 800
How to Replace the Control Arm on a Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) In this short and simple guide, you will find the main instructions for removing and replacing the control arm on a Maruti Alto 800. First, lift the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos