Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Maruti
  4. :
  5. Gypsy
  6. : How to replace the headlight bulb on the Maruti Gypsy

Maruti Gypsy - Video tutorial

Model: Maruti Gypsy MK 1 - Years 1985-2017
Part: Headlight bulb
Operation: How to replace the headlight bulb on the Maruti Gypsy

If we need to replace a burnt out light bulb or install an LED lamp on our car, we can find instructions on what to do in this description and with the images of the video tutorial. To begin, open the bonnet and locate the bulb to be replaced, proceed to unhook the power supply connector and immediately afterwards remove the bulb. If we want to install an LED lamp, we must connect the terminal of the latter to the terminal of the car and then go and insert the new lamp on the headlight housing. Finally proceed to block the lamp and the job is completed.


Posted on 28 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos