Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Maruti Vitara Brezza

Model: Maruti Vitara Brezza MK 1 - Years 2016-2023
Part: Cabin air filter

If you need to replace or simply clean the cabin air filter on this vehicle, follow the simple instructions below. After sitting in the passenger seat, open the glove compartment and detach the side support pins to fully tilt it down. Underneath, you will find the filter housing; proceed to remove the cover. Then, pull out the filter, replace it with the new one, reattach the cover, and realign the glove compartment. You're done.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in the Maruti Vitara Brezza
How to Replace the Cabin Air Filter in the Maruti Vitara Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) In this new mini guide dedicated to your Maruti Vitara Brezza, we will explain how to correctly replace the cabin air filter. This is a very importan…
How to Replace the Fuel Filter in a Maruti Vitara Brezza?
How to Replace the Fuel Filter in a Maruti Vitara Brezza?
Maruti Vitara Brezza (2016-2023 / MK 1) To replace the fuel filter in a Maruti Vitara Brezza, open the hood to access the engine compartment directly under the windshield. In the center are…
Where Are the Fuses on the Maruti Vitara Brezza?
Where Are the Fuses on the Maruti Vitara Brezza?
Maruti Vitara Brezza (2016-2023 / MK 1) The fuse boxes on the Maruti Vitara Brezza contain the fuses that manage the operation of the devices installed in the vehicle: in this type of car, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos