Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Brake Pads on the Maruti Ciaz

Model: Maruti Ciaz MK 1 - Years 2014-2024
Part: Brake pads

Today, let's go through the main steps on how to remove and replace the front brake pads on the Maruti Ciaz. First, lift the vehicle and remove the front wheel; then, unscrew the bolts securing the brake caliper to remove it, as shown in the video. At this point, apply pressure to the caliper piston to retract it; remove the old brake pads, cleaning the caliper of any dirt. Finally, install the new high-quality brake pads, applying the reverse procedure for reassembling the caliper!

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Pressure Light on the Maruti Ciaz?
How to Reset the Tire Pressure Light on the Maruti Ciaz?
Maruti Ciaz (2014-2024 / MK 1) You can reset the tire pressure light on the Maruti Ciaz by inflating the tires to the optimal pressure value: this value will be indicated in the ow…
How to Replace Spark Plugs on a Maruti Ciaz
How to Replace Spark Plugs on a Maruti Ciaz
Maruti Ciaz (2014-2024 / MK 1) This guide shows how to replace the spark plugs on a Maruti Ciaz. First, open the hood and secure it. Remove the engine air filter box by unscrewing …
How to Replace the Front Bulbs of the Maruti Ciaz
How to Replace the Front Bulbs of the Maruti Ciaz
Maruti Ciaz (2014-2024 / MK 1) In today's video, you will learn how to replace the front bulbs of the Maruti Ciaz. First, open the front hood by pulling the designated lever inside…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos