Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Airbag Light on a Maruti Ertiga?

Model: Maruti Ertiga MK 1 - Years 2012-2018
Part: Warning light – error code

To reset the airbag light on a Maruti Ertiga, first check for any damage to the appropriate fuses or the wires connected to the various sensors. If there is no physical damage, it is likely that there is an electronic issue. To make the light disappear, you will need to connect a diagnostic tool to the vehicle's OBD port. Once the scanner is connected, select the corresponding car model and its version. Then, you can turn off the ignition to clear the light.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Steering Wheel Airbag on a Maruti Ertiga
How to Replace the Steering Wheel Airbag on a Maruti Ertiga
Maruti Ertiga (2012-2018 / MK 1) In this brief and simple guide, follow the instructions to remove and replace the steering wheel airbag on a Maruti Ertiga. First, get inside the veh…
How to Manually Set the Time on a Maruti Ertiga
How to Manually Set the Time on a Maruti Ertiga
Maruti Ertiga (2012-2018 / MK 1) If the instrument cluster of your first-generation Maruti Ertiga (2012-2018) displays an incorrect time and you want to change it manually, follow th…
How to Remove the Rear Headlight on the Maruti Ertiga
How to Remove the Rear Headlight on the Maruti Ertiga
Maruti Ertiga (2018-2025 / MK 2) In this tutorial, see how to remove the rear headlight on the Maruti Ertiga to replace a faulty bulb or the entire unit. First, ensure the key is not…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos