Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlight on the Maruti Ertiga

Model: Maruti Ertiga MK 2 - Years 2018-2025
Part: Tail light

In this tutorial, see how to remove the rear headlight on the Maruti Ertiga to replace a faulty bulb or the entire unit. First, ensure the key is not in the ignition for safety. Then, open the trunk and remove the 3 bolts located on the inner edge. Once done, remove the reflector and grasp the headlight itself, pulling it towards you to extract it from the body. At this point, disconnect the power connector and proceed with replacing the damaged component.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Manually Set the Time on a Maruti Ertiga
How to Manually Set the Time on a Maruti Ertiga
Maruti Ertiga (2012-2018 / MK 1) If the instrument cluster of your first-generation Maruti Ertiga (2012-2018) displays an incorrect time and you want to change it manually, follow th…
How to Replace the Rear Brake Pads of the Maruti Ertiga?
How to Replace the Rear Brake Pads of the Maruti Ertiga?
Maruti Ertiga (2018-2025 / MK 2) To replace the rear brake pads of the Maruti Ertiga, lift the car with a jack or lift so that the corresponding wheel is off the ground. Once the whe…
How to Reset the Airbag Light on a Maruti Ertiga?
How to Reset the Airbag Light on a Maruti Ertiga?
Maruti Ertiga (2012-2018 / MK 1) To reset the airbag light on a Maruti Ertiga, first check for any damage to the appropriate fuses or the wires connected to the various sensors. If t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos