Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Maxus G10

Model: Maxus G10 MK 1 - Years 2014-2024
Part: Service warning light

Here’s how to reset the service light on the Maxus G10, a van produced by the Chinese company SAIC. Turn on the ignition and navigate through the onboard computer menu using the buttons on the steering wheel or dashboard. Use the up/down buttons to scroll through the options and select "Maintenance." Once you have selected this menu, press and hold the "OK" button for a few seconds. This will reset the light and the counter will return to zero. Not all Maxus G10 vehicles have a service light; the first service is recommended at 3,000 miles due to break-in oil, while subsequent services are every 25,000 miles or 2 years.

Posted on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Maxus G10
How to reset the service light on the Maxus G10
Maxus G10 (2014-2024 / MK 1) If when you start your Maxus G10 you notice the appearance of the maintenance warning light (with a wrench shown above) do not worry because you can …
How to open the fuel cap of the Maxus G10?
How to open the fuel cap of the Maxus G10?
Maxus G10 (2014-2024 / MK 1) Let's see in this short and simple guide how to open the fuel cap of the Maxus G10, following the instructions below. First of all, we take our remot…
Where is the fuse box located in the Maxus G10?
Where is the fuse box located in the Maxus G10?
Maxus G10 (2014-2024 / MK 1) If you are curious to know the exact location of the fuse box in your Maxus G10, all you need to do is read the instructions in the following mini gu…

Other guides you may be interested in

How to Remove the Front Door Panel on a Volkswagen Polo

How to remove the driver’s side door panel on a Volkswagen Polo? This video explains the procedure. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever to pry off the handle cover (remove the piece), then, with a screwdriver, unscrew the fastening screws in the handle inside the door panel. Unscrew the screws located in the plastic of the door opening lever. Use the lever to detach the retaining clips around the perimeter of the door panel. Finally, grasp the panel with your hands and lever it off the door. Disconnect the cable from the door opening lever and the power connectors for the window switch.

Watch the video!


by ScegliAuto

More videos