Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maxus
    3. :
  3. T60
    4. : How to reset the maintenance light on the Maxus T60

Maxus T60 - Video tutorial

Model: Maxus T60 MK 1 - Years 2016-2023
Part: Checks and maintenance
Operation: How to reset the maintenance light on the Maxus T60

Let's see in this guide the steps that will allow us to reset the engine light, but also all the other warnings, of the Maxus T60. First of all, we get on board the car and start connecting our OBD control unit to the socket of our car, located at the bottom (under the steering wheel); then we turn on the instrument cluster and connect the diagnostic tool to the computer or smartphone via app, as shown in the video. At this point let's scan for errors, thus resetting the engine light, following the video tutorial to the end!


Posted on 8 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos