Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator light on the Mazda 6

Model: Mazda 6 GJ, MK 3 - Years 2012-2024
Part: Service warning light

In short, we will see how to reset the maintenance service light for the oil change in the Mazda 6. First, get into the car and turn on the instrument panel; then use the command located on the central console to access the onboard computer settings, until you reach the maintenance section, as shown in the video. Confirm and reset the service light, following the guided procedure; then check that the maintenance key light has been successfully reset!

Posted on 9 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Mazda 6
How to Reset the Service Light on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) Today, we will discover the steps to reset the service light for routine maintenance on a Mazda 6. First, get inside the vehicle and turn on the inst…
How to reset the maintenance light on the 2019 Mazda 6
How to reset the maintenance light on the 2019 Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) If the maintenance light on the instrument panel of your Mazda 6 (2019) continues to appear despite having already performed the regular service, the…
How to reset the maintenance lights on a Mazda Mazda6
How to reset the maintenance lights on a Mazda Mazda6
Mazda 6 (2012-2024 / GJ, MK 3) This guide shows how to reset the service lights on a 2012 Mazda 6 without using any diagnostic device. The procedure is performed directly from the …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos