Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mazda 6

Model: Mazda 6 GJ, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Mazda 6, turn on the instrument panel without starting the engine, then use the buttons on the left side of the steering wheel to scroll through the instrument panel menu until you reach the maintenance section. Select the option related to the maintenance interval or oil change, then press and hold the INFO or SET button, depending on the version, until the confirmation request appears.

Confirm the reset using the same command and wait for the procedure to complete. Once finished, turn off the panel and turn it back on to check that the service light has been cleared and that the new maintenance interval has been recorded correctly.


Posted on 28 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Mazda 6
How to Reset the Service Light on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) To reset the service light on a Mazda 6, get into the vehicle and turn on the instrument panel and multimedia system without starting the engine. Use…
How to reset the service light on the Mazda 6?
How to reset the service light on the Mazda 6?
Mazda 6 (2012-2024 / GJ, MK 3) In this tutorial we can see how to reset the service in the Mazda 6, an extremely simple and quick operation, to be carried out only once all schedul…
How to Reset the Service Light on a 2017 Mazda 6
How to Reset the Service Light on a 2017 Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) There are two effective methods to reset the service light on a third-generation Mazda 6. The video provided shows both methods using a 2017 model. T…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos