Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to put the Mazda CX5 parking brake in maintenance mode

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Parking brake

In this video we see how to put the parking brake of the Mazda CX5 in maintenance mode, so that we can eventually put the rear brakes of the same car in maintenance if necessary. The first thing to do is to press the ignition button twice, to enter accessory mode: now press the accelerator pedal all the way down, then press the parking brake button and finally press the ignition button again, this time three times. We have now entered maintenance mode. To go back, once the work is done, press the ignition, pull the handbrake, press the accelerator all the way down again and press the ignition three times. This way we have exited maintenance mode.

Posted on 19 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to put the rear brakes of the Mazda CX5 in service mode
How to put the rear brakes of the Mazda CX5 in service mode
Mazda CX-5 (2017-2024 / MK 2) In this video, we see how to put the rear brakes of a Mazda CX-5 with an electric brake in service mode, in order to perform maintenance. We turn on …
How to Replace the Cabin Filter on a 2014 Mazda CX-5
How to Replace the Cabin Filter on a 2014 Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) If you own a first-generation 2014 Mazda CX-5 and are wondering how to replace the cabin air filter, read this guide and follow the steps described. …
How to Reset the Maintenance Light on the Mazda CX5
How to Reset the Maintenance Light on the Mazda CX5
Mazda CX-5 (2012-2017 / MK 1, KE) In this guide for your first-generation Mazda CX5 (2012-2017), discover how to manually reset the orange maintenance light that appears on the instru…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos