Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light in the Mazda CX-5?

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Warning light – error code

In this tutorial, we can see how to reset the tire pressure light in the Mazda CX-5, a very simple and quick operation, to be done only once the correct pressure of each tire has been restored following the instructions in the manual. First of all, let's go inside the car, then insert the key and turn on the dashboard. Next, we locate the button depicting the light in question, located in the left panel of the dashboard, and hold it down for the necessary time for the light itself to disappear from the display. Finally, restart the vehicle.

Posted on 9 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Mazda CX-5?
How to reset the tyre pressure warning light on the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) To reset the tyre pressure warning light, first inflate the tyres until they reach the pressure indicated on the sticker on the driver's door pillar.…
How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) When a tyre (or more than one) has a pressure that is too low compared to the standard, whether due to a puncture or simply being deflated, the tyre …
How to reset the tire pressure light in the Mazda CX-5?
How to reset the tire pressure light in the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) .. In this tutorial we can see how to reset the tire pressure light in the Mazda CX-5, an extremely simple and quick operation, to be.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos