Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Mazda MX-5

Model: Mazda Mx 5 MK 3, NC - Years 2005-2015
Part: Key

This tutorial is suitable for remotes where the key pops out by pressing the designated button. To access the battery inside the remote, open the key and lever at a specific point within the remote. This will release the upper part where the key is located. Now, remove the upper cover where the buttons are located, and you will see the exhausted battery. Extract it and replace it with the new battery. Reverse the steps described for reassembling the various components.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Control Battery on a Mazda MX-5?
How to Replace the Remote Control Battery on a Mazda MX-5?
Mazda Mx 5 (2015-2024 / MK 4, ND) To replace the remote control battery on a Mazda MX-5, lower the lever located at the back of the remote to slide out the key, pulling it from the bo…
Replacing the Remote Battery on Mazda MX-5
Replacing the Remote Battery on Mazda MX-5
Mazda Mx 5 (2005-2015 / MK 3, NC) Replacing the battery in the remote for the Mazda MX-5, like replacing the battery in any car key/remote, is relatively simple. First, rotate the met…
How to replace the battery of the remote control of the Mazda MX 5 2022
How to replace the battery of the remote control of the Mazda MX 5 2022
Mazda Mx 5 (2015-2024 / MK 4, ND) In order to replace the battery of the remote control of your Mazda MX 5 fourth series (year 2022) on your own, simply follow the procedure described…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos