Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Mazda 6?

Model: Mazda 6 GJ, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tire pressure warning light on the Mazda 6, you need to inflate the tires until they reach the correct pressure value: this value is indicated on the sticker attached to the driver's side door pillar. Once all tires have been properly inflated, you can use a special tool to reset the pressure sensors: this tool should be used as shown in the video to reset the sensor of each tire.

After the reset is complete, you can turn on the ignition to check if the warning light has disappeared.


Posted on 28 April 2025 by ScegliAuto


Related tutorials

How to reset the tire pressure light on the Mazda 6
How to reset the tire pressure light on the Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) The activation of the tire pressure warning light indicates a loss of pressure or a possible puncture on one or more tires; let's try to reset the wa…
How to Reset the Tyre Warning Light on a Mazda 6?
How to Reset the Tyre Warning Light on a Mazda 6?
Mazda 6 (2012-2024 / GJ, MK 3) In this tutorial, you will learn how to reset the tyre warning light on a Mazda 6, a very simple and quick operation to perform only after restoring …
How to Reset the Tyre Warning Light on a Mazda 6?
How to Reset the Tyre Warning Light on a Mazda 6?
Mazda 6 (2012-2024 / GJ, MK 3) In this tutorial, you will learn how to reset the tyre warning light on a Mazda 6. This operation is extremely simple and quick, to be performed only…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos