Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

DIY Tyre Change: Very Easy and Quick

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Tires

See other generations:
Video tutorial

As previously mentioned, changing a tyre to replace it with the emergency one is quite simple. In most cases, it is located in the boot, under a plastic cover that also includes the jack and the tool for the operation.

Take it, then insert the jack at the lifting point (look for it near the wheel, it is usually marked) and using the tool, remove all the nuts. To ensure the stability of the tyre, they are tightened very firmly, so you will need to apply some force to remove them.

Once done, take the spare wheel and reverse the procedure, always ensuring to tighten as much as possible. Generally, it is better to keep the spare wheel on for the least amount of time and to drive at a moderate speed.

Go to the tyre fitter as soon as possible.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to reset the tyre warning light on a Mazda 6?
How to reset the tyre warning light on a Mazda 6?
Mazda 6 (2012-2024 / GJ, MK 3) Resetting the tyre warning light on a Mazda 6 is a simple and quick operation. First, ensure the correct tyre pressure is restored according to the i…
How to Reset the Tyre Pressure on a Mazda 6
How to Reset the Tyre Pressure on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) Today, we will go through the entire procedure to reset the tyre pressure quickly and easily on a Mazda 6, third generation model produced from 2012 …
Installing a Short Gear Lever
Installing a Short Gear Lever
Mazda 6 (2002-2008 / GG, MK 1) Using your hands, lever at the base of the tunnel to unclip the plastic clips of the cover around the handbrake lever to remove it. Remove the screws…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos