Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Mazda 2 remote control?

Model: Mazda 2 MK 3, DJ - Years 2014-2023
Part: Key

In this tutorial we can see how to replace the battery of the Mazda 2 remote control, an extremely simple and quick operation. To do this we will need a replacement battery of type CR2025 and a small flat-tip screwdriver. First of all, we extract the emergency metal key by pressing the appropriate button, then we insert the screwdriver into the indicated slot, lever and separate the two halves of the remote control. We then remove the old battery, insert the replacement respecting the polarity and reassemble everything following the reverse procedure.

Posted on 30 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Mazda 2 car remote control
How to replace the battery of the Mazda 2 car remote control
Mazda 2 (2007-2014 / DE, MK 2, DH) Today we will see how to replace the battery of the remote control of a Mazda 2 vehicle. To perform the replacement, we need to get a CR 16 20 model …
How to replace the remote control battery for the Mazda 2?
How to replace the remote control battery for the Mazda 2?
Mazda 2 (2007-2014 / DE, MK 2, DH) To replace the battery in the remote control for the Mazda 2, use a thin object as a lever to separate the two halves of the device: this will allow …
Replacement of the battery of the remote control of the Mazda 2 MK3
Replacement of the battery of the remote control of the Mazda 2 MK3
Mazda 2 (2014-2023 / MK 3, DJ) The battery of the remote control that opens the doors of the Mazda 2, over time, runs out and needs to be replaced. To do this, let's equip ourselve…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos