Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" indicator on a Mazda CX-5?

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Service warning light

To reset the "Service" light on a Mazda CX-5, you need to turn on the ignition without starting the engine. Use the dial located in the central tunnel to access the onboard computer menu. By turning the dial, you can navigate through the options displayed on the vehicle's screen. Look for the settings menu and select the option related to maintenance or service intervals. Once inside the maintenance section, you will find the option to reset. Select it by pressing the dial and confirm the choice by holding it down for a few seconds, until the display indicates that the reset operation has been successfully completed. At this point, the "Service" light should turn off, indicating that the system has recorded the new maintenance interval. After completing the process, it is advisable to turn off and on the ignition to verify that the light is no longer present. If the light persists, repeat the procedure making sure to follow all the steps correctly.

Posted on 16 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Mazda CX-5?
How to Reset the Service Light on the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In this tutorial, you can see how to reset the service light on the Mazda CX-5, a very simple and quick operation that should only be performed once …
How to Reset the Service Light on the Mazda CX-5 2023
How to Reset the Service Light on the Mazda CX-5 2023
Mazda CX-5 (2017-2024 / MK 2) To manually reset the service light on your Mazda CX-5 (2023 model), follow the steps described below in the correct order to complete the operation …
How to reset the service in the Mazda CX-5?
How to reset the service in the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) In this tutorial, see how to reset the service in the Mazda CX-5, a very simple and quick operation, to be performed only after completing all requir…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos