Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Tire pressure monitoring system reset on Mazda 6

Model: Mazda 6 GJ, MK 3 - Years 2012-2024
Part:

Today we will see how to reset the tire pressure monitoring system on a Mazda 6 produced from 2012 to 2023. First, we need to check the correct pressure of all four tires as indicated by the manufacturer, this pressure is listed on a sticker located on the driver's side door frame. Once we have checked the pressure, we can proceed to reset the warning light, let's see how to do it. Start by turning on the vehicle's ignition without starting the engine, then press and hold the reset button on the dashboard for a few seconds until we see the tire pressure warning light on the speedometer flash twice followed by an audible signal indicating the completion of the procedure.

Posted on 14 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the tire pressure warning light on the Mazda 6
Resetting the tire pressure warning light on the Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) Following today's instructions, we will see how to reset the tire pressure warning light (TPMS) of the Mazda 6; before resetting, it is necessary tha…
How to reset the tire pressure sensor on the Mazda 6
How to reset the tire pressure sensor on the Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) Shortly we will see the instructions that will allow us to reset the tire pressure warning light on the Mazda 6. First, we get into the car and start…
How to reset the tire pressure light on the Mazda 6
How to reset the tire pressure light on the Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) The activation of the tire pressure warning light indicates a loss of pressure or a possible puncture on one or more tires; let's try to reset the wa…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos