Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator on the Mazda CX-3

Model: Mazda Cx 3 MK 1 - Years 2015-2023
Part: Service warning light

The steps outlined in this guide will allow us to reset the service light for the regular maintenance of the engine oil change for the Mazda CX-3. First, we get into the car and start the instrument panel; then we use the central tunnel control to go to the car settings and then to the service option, as shown in the video. At this point, we follow the guided procedure to confirm and reset the service light, thus clearing the maintenance reminder from the instrument panel!

Posted on 11 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" indicator on a Mazda CX-3?
How to reset the "Service" indicator on a Mazda CX-3?
Mazda Cx 3 (2015-2023 / MK 1) To reset the "Service" light on a Mazda CX-3, turn on the instrument panel without starting the engine. Use the buttons located on the center console…
How do you reset the Service light on the Mazda CX-3?
How do you reset the Service light on the Mazda CX-3?
Mazda Cx 3 (2015-2023 / MK 1) In order to reset the Service light of the Mazda CX-3, you need to turn on the instrument panel, so that you can navigate within the menu on the cent…
How to Reset the Service Light of the Mazda CX-3
How to Reset the Service Light of the Mazda CX-3
Mazda Cx 3 (2015-2023 / MK 1) This article shows the procedure to reset the service light of the Mazda CX-3. It is recommended to perform this procedure only after having the vehi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos