Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel filter in the Mazda CX-5?

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Diesel fuel filter

In this tutorial we can see how to replace the diesel filter in the Mazda CX-5, a very simple operation. First of all, make sure that the engine is completely cold, then open the hood and remove both the battery and its support. Next, locate the filter in question, remove it from the wall by unscrewing the fixing nuts with a 10mm socket wrench and disconnect both the tubes and the sensor connector. At this point, all that remains is to separate the filter itself from the upper support, transfer the sensor to the replacement and assemble the latter following the reverse procedure.

Posted on 5 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel filter on a Mazda CX-5?
How to replace the fuel filter on a Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) To replace the fuel filter on a Mazda CX-5, you need to unscrew the bolts securing the rear seats so they can be completely removed, providing access…
How to Replace the Diesel Filter on Mazda CX-5 2.0L
How to Replace the Diesel Filter on Mazda CX-5 2.0L
Mazda CX-5 (2012-2017 / MK 1, KE) Here are the instructions for removing and replacing the diesel filter on a Mazda CX-5 2.0L. First, open the rear doors and start by removing the rea…
How do you replace the fuel filter of the Mazda CX-5?
How do you replace the fuel filter of the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In order to replace the fuel filter of the Mazda CX-5, you must loosen the screws that secure the rear seat of the car, so that it can be completely …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos