Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. CX-5
    4. : How do I replace the fuel filter on the Mazda CX-5?

Mazda CX-5 - Video tutorial

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Diesel filter
Operation: How do I replace the fuel filter on the Mazda CX-5?

In order to replace the Mazda CX-5 diesel filter, you need to unscrew the screws that secure the rear seats, so that they can be completely removed giving access to the components in the lower part. Here you will have to remove the cover placed to protect the fuel pump: in this way it will be possible to disconnect the pipes and connectors connected to the pump, which can then be extracted from its housing.The filter installed on the pump can then be removed and replaced with a new spare part. After the filter has been removed, all disassembled components can be reinstalled.


Posted on 20 April 2024 by ScegliAuto



Replacement of the fuel filter for the Mazda CX-5.
Mazda CX-5 (2017-2023 / MK 2) Today's guide will show us how to disassemble and replace the fuel filter of the Mazda CX-5, following the instructions below. First, we open the hoo
How to replace the fuel filter of the Mazda CX-5 2.0L.
Mazda CX-5 (2012-2017 / MK 1, KE) Let's briefly see the instructions necessary to disassemble and replace the diesel filter of the Mazda CX-5 2.0L. First, we open the rear doors and s
How to replace the fuel pump of the Mazda CX-5.
Mazda CX-5 (2017-2023 / MK 2) In this guide, we will see the step-by-step instructions that will allow us to disassemble and replace the fuel pump of the Mazda CX-5. First, we ope

Other guides that may interest you

    Frequently Asked Questions

    • Cx 5 2012-2017 - Where is the diesel filter on Mazda CX5 year 2016? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos