Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Mazda CX 60

Model: Mazda CX-60 MK 1 - Years 2022-2026
Part: Service warning light

Thanks to the following guide addressed to all of you who own the new Mazda CX 60 (year 2025), you will be able to complete the service light reset procedure quickly and safely. First of all, reach the driver's seat inside the car and then press the ignition button twice in a row to start the instrument panel in diagnostic mode. At this point, use the infotainment system and the corresponding control knob to click on "Information" and then on "Vehicle status monitor". Immediately after, select the "Vehicle maintenance settings" option and then "Reset oil change distance". Finally, confirm the reset of the light and you are done.

Posted on 5 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Mazda CX 60
How to Remove the Door Panel of a Mazda CX 60
Mazda CX-60 (2022-2026 / MK 1) Whether you need to clean it or perform a repair on the window lifter or other, the door panel, in this case the rear door, of the Mazda CX 60 may ne…
How to replace the cabin air filter of the 2025 Mazda CX 60
How to replace the cabin air filter of the 2025 Mazda CX 60
Mazda CX-60 (2022-2026 / MK 1) If you own the new Mazda CX 60 (year 2025) and are wondering how to replace the cabin air filter, then all you have to do is read the following guide…
How to remove the front headlight from a Mazda CX60.
How to remove the front headlight from a Mazda CX60.
Mazda CX-60 (2022-2026 / MK 1) To remove the front headlight of the Mazda CX60, it is necessary to disassemble the front bumper to access the mounting bolts. Let's start by disconn…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos